Han Martex Desk with drawer

Han Martex Desk with drawer

Han Martex desk with drawer unit expresses a rigorous and decisive style. It is characterised by the quality of the materials used, attention to detail and careful workmanship, without neglecting comfort, style and authority in offices and working environments. The Han desk blends into a harmonious whole to meet the highest aesthetic standards, with a top in melamine, lacquer, wood, leather and concrete combined with an aluminium or brill structure. Various options for electrifying desk tops are available. Side drawer unit available in metal or wood in different finishes, sizes and compositions to meet every need.

HAN MARTEX DESK STRUCTURE:

Structure made with an extruded aluminium frame, section 63x60 mm, joined by means of a die-cast aluminium joint (flange), fastened from the inside with metric pitch screws, all painted with epoxy powders in aluminium finish, or in brushed brill aluminium finish (beams) and chrome finish (flanges).

Tops in:

• Wood veneered tops: 14 mm thick fibreboard veneered in the finishes available in the material sample book, protected by varnish with an open-pore UV finish. Wood edges 1 mm thick.
• Lacquered tops: 14 mm thick fibreboard laminated with melamine paper, bordered with 1.5 mm thick ABS and painted with matt polyurethane paints in the colours available in the materials sample book
• Veneered tops: 14 mm thick fibreboard laminated with melamine paper in the catalogue finishes. ABS edging 1.5 mm thick.
  All wooden tops are fitted with high-power magnets fixed to the underside for attachment to the steel perimeter structure; centring of the tops is guaranteed by special pins fixed to the top.
• Glass tops: 12 mm thick glass with flat polished edges and rounded corners, lacquered in the colours available in the materials sample book
• No-print glass tops: 12 mm thick glass with flat polished edges and rounded corners. Acid-etched is glass worked on one side with a special acid solution that makes it stain-resistant to the touch of the fingers.
  
  

Available in the following colour categories visible on the material swatch book:

• Melamine - MEL
• Matt lacquered - LAC
• Wood - RLC 004 Classic Oak
• Wood - WAL 002 Walnut
• Wood - RTA 005 Tobacco Oak
• Lacquered glass - GLS 596 Black
• Lacquered glass - GLS 613 Titanium
• Lacquered glass - GLS 620 Shadow
• Lacquered glass - GLS 591 White
• Lacquered glass - GLS 610 Cream
• Lacquered glass no print - GLS NP 696 Black
• Lacquered glass, no print - GLS NP 713 Titanium
• No-print lacquered glass - GLS NP 720 Shadow
• No-print lacquered glass - GLS NP 691 White
• No-print lacquered glass - GLS NP 710 Cream
• Faux leather - Cat. E
• Leather - Cat. G
  
  
  

Legs: made of extruded aluminium, section 80x80 mm, thickness 2.5 mm, painted with epoxy powders in aluminium finish, or in brill brushed aluminium finish. Fitted with top cap and bottom cap made of die-cast aluminium, in painted or chrome-plated aluminium finish; All legs are fitted with a leveller. Legs are available for desk height H. 750 mm.

Wall: wall sides made of extruded aluminium frame in brill finish and four infill solutions:

• in melamine-faced fibreboard in the finishes from the materials sample book.
• in melamine-faced fibreboard panels lacquered with matt embossed polyurethane varnish in finishes from the materials sample book.
• in melamine-faced fibreboard laminated with melamine paper and lacquered with glossy brushed polyurethane varnish with finishes from the materials sample book.
• in fibreboard veneered in walnut or light zebrano finish.

Chest of drawers made with:

• Body: made of 18 mm thick melamine-faced fibreboard, bordered with 15/10 abs edge in finish with the surface or matt lacquered in the finishes of the material samples.
• Drawer fronts: made of 18 mm thick fibreboard, melamine paper faced, edged with 15/10 abs edge in finish with the surface or matt lacquered in the finishes shown in the sample collection of materials.
• Guides and drawers: 3-drawer solution with partial-extension roller guides, drawers made of 12 mm thick fibreboard covered with black PVC.
• Doors: made of 18 mm thick fibreboard covered with melamine paper in the catalogue finishes, edged with 1.5 mm thick ABS edging in the same finish as the surface or matt lacquered in the catalogue finishes. Opening is by means of 95° opening hinges.

Locking is by means of a lock with differentiated coding. The handle is made of extruded aluminium, painted with epoxy powder paint in black, white and titanium finish.

View sample materials.

Various options for the electrification of desk tops and meeting tables, e.g. various cable guides, plug-in sockets, flippers and flip tops. Cable entry is via vertebra in the single leg or via electrified central leg. Please contact customer service for more information.

On request it is possible to add Modesty Panels that can be attached to the desk underneath the desk by means of special brackets that can be freely attached to the beams; available with straight or rounded corners.

For further information please contact customer service.

HAN MARTEX DESK SIZES:

The available sizes are as follows:

• Han desk with legs - L. 140 cm x P. 80 x H. 75 cm
• Han desk with legs - L. 160 cm x P. 80 x H. 75 cm
• Han desk with legs - L. 180 cm x P. 80 x H. 75 cm
• Han desk with legs - L. 200 cm x P. 80 x H. 75 cm
• Han desk with legs - L. 200 cm x P. 100 x H. 75 cm
• Han desk with legs - L. 220 cm x P. 100 x H. 75 cm

• Han desk with legs - L. 120 cm x P. 120 x H. 75 cm
• Han desk with legs - L. 140 cm x P. 140 x H. 75 cm
• Han desk with legs - L. 160 cm x P. 160 x H. 75 cm

• Han desk with side wall - L. 160 cm x P. 80 x H. 75 cm
• Han desk with side wall - L. 180 cm x P. 80 x H. 75 cm
• Han desk with side wall - L. 200 cm x P. 80 x H. 75 cm
• Han desk with side wall - L. 200 cm x P. 100 x H. 75 cm
• Han desk with side wall - L. 220 cm x P. 100 x H. 75 cm

STORAGE UNITS:

MARTEX DELIVERY TIMES:

Estimated time for production and delivery of the product 6 working weeks from payment received.
In this period, deliveries by the manufacturing companies may be delayed.